Embeding your channel on your team page

Ok so now you have your embed code(s) . You can put both ustream and twitch up, if u think you will use them , or just use one. either way you can embed your "channel" on your team page, So now you have copied your embed code, im going to walk you thru how to put it on your teams page.you may look at my teams page (seattle) to see how it should look when your done.  Just follow along :

FOR TWITCH CHANNELS:

1. here on our daddyleagues site, click the "front office " tab

2. click the "post blog" tab there

3.then give your post a title

4.then scroll down to where it says "category" click the little option there(box says league news at first), and a drop down box will come up. Select your teams name there and click it.

5. right below this , you will see it say "content" and in the upper left corner of that box there, you will see the word "source" , BE SURE TO CLICK THIS FIRST HERE!

6.after you have clicked "source" , then go down to the box where you would type words. first type in    <a>     ( just like it that)

7.then right after you type in <a>    , then you paste your code right after it.

8. now you will notice when you paste your code , it will start like this <object type="application/x-shockwave-flash" height="378" width="620" , you will need to only change where it says   width="620"   , to make it say width="450" , u dont have to retype the whole thing, just delete out the 620 and input 450 there. make sure the "450" is still on both sides. this is only thing you have to modify on these, so you maximize the viewing box on your teams page.

9. scroll down to bottom and click "post blog"

10. your done , you can check your teams page and it should be there now.

FOR USTREAM CHANNELS :

1. here on our daddyleagues site, click the "front office " tab

2. click the "post blog" tab there

3.then give your post a title

4.then scroll down to where it says "category" click the little option there(box says league news at first), and a drop down box will come up. Select your teams name there and click it.

5. right below this , you will see it say "content" and in the upper left corner of that box there, you will see the word "source" , BE SURE TO CLICK THIS FIRST HERE!

6.After you have clicked the word "source" you go down to the box where you would normally type words, and just paste your code

7. You will notice, your code start off like this  <iframe width="480"   , here you just need to delete the 480 , and replace it with 450 . make sure when you do it still looks like this <iframe width="450"  but just notice now it says 450 in stead of 480. this is the only thing you need to change about the code, this is just to maximize the video player box for your teams page.

8. scroll down and click "post blog" after that and your done

9. you can look on your teams page now to make sure it worked properly